0

Your Cart is Empty

Sold out

Bronsun Milk-Cream Developer 3% (20ml)

Buy now, pay later...
  • Afterpay
  • Klarna
  • Zip Logo

Specially developed Milk-Cream Developer helps a master to achieve perfect tinting mixture consistency, providing a long-lasting tinting result without damaging hair structure.

For use with BRONSUN® Cream Dye and BRONSUN® Gel Dye products. 

Shelf life is 36 months unopened, 12 months opened.

IMPORTANT: Always patch test before application. 

 

DIRECTIONS

FOR BROWS:

  • Perform a patch test 24-48 hours before application
  • Cleanse the eyebrow area with an oil-free makeup remover. If needed, degrease the skin and hairs using Saline Solution or Lash Primer.
  • Apply Zone Gel or White Eyebrow Paste around the eyebrows, avoiding areas to be tinted.
  • Thoroughly mix Milk-cream Developer BRONSUN and Eyelash and eyebrow dye BRONSUN in a 1:1 ratio until well mixed. (We recommend around .5cm of the dye and equal part of the developer)
  • Using a brush, quickly and evenly apply a thin layer of the prepared mixture to the eyebrows, shaping them as desired. Be careful not to touch the skin.
  • Leave the dye on eyebrows for 10-20 minutes, depending on desired intensity.
  • After the recommended time, remove the dye using a wet cotton pad. Wash off any residue with water. Keep eyes closed until all dye is removed.
  • If you accidentally tint the skin, gently wipe the area with BRONSUN Remover using a microbrush or cotton swab. Repeat if necessary. Wash off residue with water.

FOR LASHES:

  • Perform a patch test 24-48 hours before application
  • Cleanse the eyelashes with an oil-free makeup remover. If needed, degrease the skin using Saline Solution or Lash Primer.
  • Apply Zone Gel or White Eyebrow Paste around the eyes, avoiding the eyelashes.
  • Place protective pads along the lower eyelid edge, ensuring the lower lashes are outside the pads.
  • Thoroughly mix Milk-cream Developer BRONSUN and Eyelash and eyebrow dye BRONSUN in a 1:1 ratio until well mixed (We recommend around .5cm of the dye and equal part of the developer)
  • Using a brush, quickly and evenly apply a thin layer of the prepared mixture to the eyelashes. Ensure eyes are closed during application.
  • Leave the dye on eyelashes for 10-15 minutes, depending on desired intensity.
  • After the recommended time, remove the dye using a wet cotton pad. Wash off any residue with water. Keep eyes closed until all dye is removed.
  • If you accidentally tint the skin, gently wipe the area with BRONSUN Remover using a microbrush or cotton swab. Repeat if necessary. Wash off residue with water.

AFTERCARE:

  • Avoid contact with water for 24 hours after the procedure
  • Avoid aggressive cosmetic treatment (scrubs, peels, alcohol-containing products) and steam (baths and saunas).
  • Do not use lotions, toners and creams in the eyebrow area.
STORAGE

Store out of direct sunlight between 5°C - 25°C

INGREDIENTS

Water, Cellulose Gum, Sodium Hydroxide, Sodium Sulfate, P-Phenylenediamine, Resorcinol, CI 16035, CI 73015.

SHIPPING INFO

We ship Monday to Friday excluding public holidays in Victoria. Orders placed before 1pm Melbourne time are dispatched same day with a tracking number provided.

Orders over $200 AUD qualify for free express shipping.

Startrack Premium: 1-2 Business Days (Overnight to Metro areas)
Express Post: 1-3 Business Days
Standard Post: 2-5 Business Days

*These are estimates only ; delays can occur. 

International rates are calculated at checkout, with shipping estimates available from our shipping information page

Pickup is not currently available.

FREE 60 DAY RETURNS

Customer satisfaction is our obsession. That's why we give you a full 60 days to return any purchase (at our expense) for a refund or store credit, even if you’ve started using it.

So you can shop with us absolutely risk-free. Just get in touch with us via email or socials and we'll get you sorted.

Visit our returns and refunds page for more full terms & conditions

DISCLAIMER: With the exception of our Aftercare & Retail Range our products are intended for PROFESSIONAL USE ONLY. My Lash Store accepts no responsibility for the misuse of our products.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Specially developed Milk-Cream Developer helps a master to achieve perfect tinting mixture consistency, providing a long-lasting tinting result without damaging hair structure.

For use with BRONSUN® Cream Dye and BRONSUN® Gel Dye products. 

Shelf life is 36 months unopened, 12 months opened.

IMPORTANT: Always patch test before application. 

 

DIRECTIONS

FOR BROWS:

  • Perform a patch test 24-48 hours before application
  • Cleanse the eyebrow area with an oil-free makeup remover. If needed, degrease the skin and hairs using Saline Solution or Lash Primer.
  • Apply Zone Gel or White Eyebrow Paste around the eyebrows, avoiding areas to be tinted.
  • Thoroughly mix Milk-cream Developer BRONSUN and Eyelash and eyebrow dye BRONSUN in a 1:1 ratio until well mixed. (We recommend around .5cm of the dye and equal part of the developer)
  • Using a brush, quickly and evenly apply a thin layer of the prepared mixture to the eyebrows, shaping them as desired. Be careful not to touch the skin.
  • Leave the dye on eyebrows for 10-20 minutes, depending on desired intensity.
  • After the recommended time, remove the dye using a wet cotton pad. Wash off any residue with water. Keep eyes closed until all dye is removed.
  • If you accidentally tint the skin, gently wipe the area with BRONSUN Remover using a microbrush or cotton swab. Repeat if necessary. Wash off residue with water.

FOR LASHES:

  • Perform a patch test 24-48 hours before application
  • Cleanse the eyelashes with an oil-free makeup remover. If needed, degrease the skin using Saline Solution or Lash Primer.
  • Apply Zone Gel or White Eyebrow Paste around the eyes, avoiding the eyelashes.
  • Place protective pads along the lower eyelid edge, ensuring the lower lashes are outside the pads.
  • Thoroughly mix Milk-cream Developer BRONSUN and Eyelash and eyebrow dye BRONSUN in a 1:1 ratio until well mixed (We recommend around .5cm of the dye and equal part of the developer)
  • Using a brush, quickly and evenly apply a thin layer of the prepared mixture to the eyelashes. Ensure eyes are closed during application.
  • Leave the dye on eyelashes for 10-15 minutes, depending on desired intensity.
  • After the recommended time, remove the dye using a wet cotton pad. Wash off any residue with water. Keep eyes closed until all dye is removed.
  • If you accidentally tint the skin, gently wipe the area with BRONSUN Remover using a microbrush or cotton swab. Repeat if necessary. Wash off residue with water.

AFTERCARE:

  • Avoid contact with water for 24 hours after the procedure
  • Avoid aggressive cosmetic treatment (scrubs, peels, alcohol-containing products) and steam (baths and saunas).
  • Do not use lotions, toners and creams in the eyebrow area.
STORAGE

Store out of direct sunlight between 5°C - 25°C

INGREDIENTS

Water, Cellulose Gum, Sodium Hydroxide, Sodium Sulfate, P-Phenylenediamine, Resorcinol, CI 16035, CI 73015.

SHIPPING INFO

We ship Monday to Friday excluding public holidays in Victoria. Orders placed before 1pm Melbourne time are dispatched same day with a tracking number provided.

Orders over $200 AUD qualify for free express shipping.

Startrack Premium: 1-2 Business Days  (Overnight to Metro areas)
Express Post: 1-3 Business Days
Standard Post: 2-5 Business Days

*These are estimates only ; delays can occur. 

International rates are calculated at checkout, with shipping estimates available from our shipping information page

Pickup is not currently available.

FREE 60 DAY RETURNS

Customer satisfaction is our obsession. That's why we give you a full 60 days to return any purchase (at our expense) for a refund or store credit, even if you’ve started using it.

So you can shop with us absolutely risk-free. Just get in touch with us via email or socials and we'll get you sorted.

Visit our returns and refunds page for more full terms & conditions

DISCLAIMER: With the exception of our Aftercare & Retail Range our products are intended for PROFESSIONAL USE ONLY. My Lash Store accepts no responsibility for the misuse of our products.